Career Guangshi NT-108 internal communication manual.
Warning:
â— Before using this device, please read this manual carefully and save the manual.
â— Improper installation and use of this equipment may cause serious damage to the machine.
â— Before using or cleaning the machine, please unplug the power cord and do not hot plug it.
â— Do not use a liquid or corrosive cleaning agent to wipe the body. Use a general damp cotton cloth to clean and wipe.
â— Do not use this product near fire, heating, hot air, or water.
â— If you encounter any problems during use, please feel free to call our company: 010-84467944 or 24-hour technical support hotline
â— All rights to interpret this manual belong to Beijing Cree Guangshi.
Foreword
First of all, thank you for purchasing the C&C N&WNT-108 intercom system. This series is equipped with the most modern technology to provide maximum performance and is fully compliant with international technical specifications. In today's intercom market, it is known for its ultra-clear call quality, beautiful and compact design, and durable, low-power, energy-efficient configuration.
Based on the principle of "service first, customer first", we carefully design each circuit board and test each line. Each machine must undergo strict inspection by various departments before leaving the factory to ensure 100% pass rate of the product. .
Overall function description:
â— Full-duplex system, which can be connected with a pair of headset microphones. The 1-8 intercom can be connected to the intercom and intercom substation of the intercom system. The system slave can transmit video, call and Tally signals at the same time, and the call distance can be up to 450 meters.
â— Ultra-compact size and proper weight allow it to be fully contained in a standard 19" unit rack;
â— Unique design reduces internal losses, making the actual operating power of the equipment greater than 80%, minimizing power consumption and reducing the cost of use;
â— Robust and reliable mechanical and electronic components have the advantages of long mean time between failures and simple maintenance. All modules can be easily distinguished and inspected through multi-level interfaces and modules.
â— All transceiver modules use the same interface. The Led color change lamp is user-friendly and can quickly view operating parameters.
Substation panel
III. Introduction of each part
(1) The power switch turns the internal call system off.
(2) 3.5mm earphone jack, plug in the headphones to monitor the source content sent by each substation.
(3) 3.5mm headphone microphone jack, you can send voice commands to each substation by inserting a microphone.
(4) The ALL indicator light can connect or disconnect all communication channels at the same time. Red is the connection and green is the disconnection. Press the 1-8 button alone to connect or disconnect the corresponding communication channel.
(5) Mute button, red is to enable mute, then all stations are silent mode, but it does not affect the substation to send the source to the main station. Green is the normal communication state.
(6) The main station monitors the sound size adjustment knob, the left side is the smallest and the right side is the maximum.
(7) (Optional parts) XLR gooseneck microphone terminal.
(8) (Optional parts) Speaker.
(9) 1-8 component station connection terminal
(10) Tally signal input terminal
(11) 220V power socket
(12) The mute button has a lock function. When pressed once, the main station is in the silent mode, but it does not affect the main station to release the sound source to the substation. Press again to resume normal communication.
(13) 3.5mm earphone jack, plug in the headphones to listen to the source content sent by the main station.
(14) 3.5mm headphone microphone jack, you can send voice commands to the master station by inserting a microphone.
(15) 3.5mm Tally indicator light jack, connected to Tally indicator light.
(16) Main station connection terminal
Physical picture:
Wax leaf specimens also known as pressed specimens, dried plant specimens of a species.Collection with a section of plant flowers and fruit with leaf branch, or flowers or fruit of the whole plant, after in a specimen holder medium voltage flat, dry, with in the paper, namely into a dried leaf specimens, stick in the paper, the specimen in the top left corner posted in Taiwan paper records the plant habitat, characteristics, origin, date of acquisition, the common name field record signing, stick a name sign on the bottom right hand corner, after careful identification, write the name of the plant, such as a complete dried leaf samples, can be long-term preservation in the specimen preserved specimen enclosure.For teaching and research.
Leaf Specimen,Plant Specimen,Plant Specimens,Biological Specimens
Xinxiang Vic Science&Education Co.,Ltd. , https://www.huaxinbusbarchina.com