DP-YK-30 series integrated air-cooled precision freezer (chiller) has the characteristics of small size, convenient installation and movement, and can be moved freely indoors. Because the compressor, water pump, temperature control table, pressure control, etc. are imported products, the reliability is high and the noise is low. The evaporator is made of pure titanium metal or stainless steel plate, corrosion resistant and antifreeze. These models are widely used in scanning electron microscopy, atomic absorption, ICP, laser, vacuum coating machine, ion etching machine, oxygen and nitrogen. Analytical instruments such as analyzers, diffractometers, and fluorescence spectrometers, as well as medical instruments, machine tools, and hydraulic systems.

The combination of the unit refrigeration system is flexible and can be selected according to the cooling mode and control mode. The heat exchange efficiency of the plate is high, but the titanium coil has strong anti-freezing ability.
? The unit adopts intermittent working mode (low temperature storage or upper and lower limit), energy saving (energy saving effect is estimated to be 20% - 40% less than the hot gas bypass mode), prolonging the life of the compressor, (increased by at least the hot gas bypass mode) 30%). Temperature control is accurate and stable. The low temperature storage method is PID dynamic tracking control mode, and the water temperature control accuracy can reach ± ​​0.5 °C. The upper and lower limit control mode water temperature control range is ± 2 °C.
? Titanium coil evaporator has the characteristics of high heat exchange efficiency, corrosion resistance and anti-freezing ability. The evaporator will not be damaged even if it freezes during operation
? There are many models and all kinds of models, suitable for all kinds of occasions.
? The operation is very simple, just press the start switch and the unit will enter the working state.
The unit is a unitized component design structure, so maintenance is very convenient and fast, reducing maintenance costs and downtime.
All the key components of the unit are made of world-renowned brands, so the performance is stable and reliable, and the fault is extremely low.
The company has strong design and manufacturing capabilities, and can design and manufacture non-standard products according to the specific requirements of customers.

Specification model

Specification model
DP-YK-06
DP-YK-10
DP-YK-20
DP-YK-30
DP-YK-50
DP-YK-60
DP-YK-80
DP-YK-100
DP-YK-120
DP-YK-150
DP-YFK-200
DP-YK-250
DP-YK-300
DP-YK-400
DP-YK-500

Standard refrigeration quantity
50HZ

60HZ
Kcal/h
1290
1514
2382
2786
4541
5315
6803
7955
11094
13235
13091
15901
19746
23521
22188
26478
25146
29661
35652
42162
44230
52064
50293
59314
67304
80324
91461
109168
115498
138460

50HZ

60HZ
KW
1.5
1.76
2.77
3.24
5.28
6.18
7.91
9.25
12.9
15.39
15.22
18.49
22.96
27.35
25.81
30.79
29.24
34.49
41.33
48.7
51.43
60.54
58.48
68.97
78.26
99.4
106.35
126.94
134.3
161

Input total power
Total power inpu
KW
1.01
1.34
2.27
3.33
5.8
6.33
9.25
10.15
11.58
16.6
twenty one
23.8
33.2
44.4
56

power supply
Power source
1PH ~ 220V 50HZ ( 60HZ )
3PH ~ 380V 50HZ (200V/220V/415V 50HZ/60HZ)

(110V 50HZ/60HZ)

Refrigerant
name
Name
R22 (R 134a / 407c )

control method
Control mode
Capillary
Capillary vessel
Externally balanced thermal expansion valve
Outside balance -like thermal energy expansion valve

compressor

Compressor
Types of

Type
Fully enclosed rotary

Entire seal rotary system
Fully enclosed scroll (piston)

Entire seal vortex type (plunger type)

power

Power
KW
0.59
0.89
1.77
2.8
4.66
5.2
7.95
8.85
9.98
7.2*2
8.85*2
9.98*2
13.62*2
18.78* 2
23.6*2

Condenser Condenser
Types of

Type
High efficiency copper tube sleeve aluminum fin type + low noise outer rotor fan
The high-effect red copper pipe box aluminium wing slices dyadic + low noise outside rotator wind machine

Cooling amount of wind
m 3 /h
750
1000
2000
3000
5000
6000
8000
10000
12000
15000
20000
25000
30000
40000
50000

Evaporator
Types of

Type
Water tank coil (plate type)

Water tank plate tube (beat)

Freezing water volume
m 3
0.258
0.303
0.476
0.557
0.908
1.063
1.36
1.59
2.22
2.65
2.60
3.20
3.95
4.7
4.52
5.31
5.03
5.93
7.23
8.43
8.84
10.41
10.06
11.86
13.46
16.06
18.29
21.83
23.1
27.69

Water tank capacity
L
16
20
40
50
70
70
120
200
200
270
350
350
420
550
600

Inlet and outlet pipe Turnover water caliber
Inch
1/2"
1/2"
1/2"
1"
1"
1"
1"
1-1/2"
1-1/2"
2"
2"
2-1/2"
2-1/2"
3"
3 ′′

Water pump

Water pump
power

Power
Kw
0.37
0.37
0.37
0.37
0.75
0.75
0.75
0.75
1.1
1.5
2.25
2.25
3.75
3.75
5.5

Head

Lift
m
25
25
25
20
25
25
25
20
25
25
25
20
25
20
25

safety protection

Safekeeping of security
Compressor overheat protection, overcurrent protection, high and low pressure protection, over temperature protection, flow protection, phase sequence / phase loss protection, exhaust overheat protection, frost protection
The compressor excessively hot protection, has flowed the protection, the height pressure protection, the ultra warm protection, the currentcapacity protection, the foreword/lacks protects, has exhausted the hot protection, frostproof protection

Mechanical size
long

Long
Mm
500
500
580
930
1140
1140
1310
1680
1680
1800
2000
2000
2200
2500
2980

width

Width
Mm
500
500
550
520
560
560
720
810
810
990
1130
1130
1130
1500
1700

high

High
Mm
725
725
925
975
1040
1040
1270
1280
1280
1680
1720
1914
2026
2250
2300

Mechanical weight

Mechanical weight
Kg
50
73
100
135
175
180
320
450
530
750
835
920
1080
1125
1250

Bulk Feed Truck

Bulk feed truck, Bulk feed trucks, also known as bulk grain truck, Bulk corn truck,feed truck, Silo feed truck, Bulk Grain Carrier used to transport grains like corn, soy and concentrate for Animals Simple structure, reliable performance, easy to transport a large amount of control, maneuverability strong, non-polluting materials, which is widely used in feed for farmed transport major small and medium enterprises.

Bulk feed car Introduction

Mainly used for transporting bulk finished feed or feed produced from raw grain to livestock farms feed mills, poultry farms and feed processing user, but it can also be used to transport of certain non-corrosive powder granular materials, such as pharmaceutical powder and grain turnover .

Bulk feed feed tank car set up on the chassis of the truck, special facilities by the tank assembly, conveyor systems (horizontal discharge systems, vertical discharge system and the activities of the discharge system components), bulk feed tank cars hydraulic system (high-pressure pump the three output terminals via a line connecting the dispensing valve and the valve angle of the hydraulic motor, respectively, as well as lift cylinder series with horizontal discharge, vertical discharge, the discharge of the hydraulic motor activity), bulk feed tank cars electric systems, pneumatic warehouse mechanism and other components. At the bottom of the tank with a gate in the gate below the horizontal screw conveyor equipped (commonly known as horizontal stirring cage), is driven by the power take off from the auto gearbox output power, and then drive high pressure pump to drive the hydraulic system, hydraulic bulk feed tank cars motor gear driven by the level of the auger blade shaft and blade rotation, the activities of the delivery system (commonly known as activity stir cage) to feed output. Flat roof facing a discharge auger activity rotatably and lifting, transportation spiral lying in the top of the tank top; when unloading the lift, car bulk feed tank pipe end of the discharge port and livestock feed farm gate contact holding tank at the top of the alignment, complete discharge.

Bulk feed car Features

1 .. bulk transport of feed ratio packed into bags of transport not only labor-saving, and low cost.

2. Bulk feed tank body sealed in transport, reduce losses, quality assurance, to avoid contamination.

3. Automatic feeding on discharge, continuous operation, greatly improving production efficiency.

4. The sub-positions can be installed inside the tank, which can transport a variety of different types of feed or expanded media.

5. The standardization of components, easy maintenance.

Tank dimensions (L * W * H) and the corresponding volume of correspondence

Corresponds to the effective tank volume (m3) and the corresponding body size

Number of sub-tank positions 1-5 (with storage bodies, which can transport multiple types

The average discharge rate (kg / min) 510 (different drive forms will change accordingly)

Activities unloading system rotation angle of 180 degrees

Activities unloading system maximum elevation angle of 60 degrees

Transmission distance of maximum distance (m) 7.2

The maximum vertical distance (m) 8.2

Residual rate 0.01

Bulk feed Cars Category

Bulk feed car type vehicle and a separate tank (available appropriate trucks transport) and the like. Divided by driving form: electric discharge bulk feed truck, full hydraulic unloading bulk feed gas car unloading bulk feed car.

Bulk feed hydraulic car

Hydraulic feed bulk feed tank car set up on the chassis of the truck, special facilities by the tank assembly, conveyor systems (horizontal discharge systems, vertical discharge system and the activities of the discharge system components), the hydraulic system (high-pressure pump via a line three output terminals connected to the valve and dispensing valve are the corner of the hydraulic motor, and a horizontal lift cylinder discharge, vertical discharge, the discharge of the hydraulic motor activity), electric system, pneumatic storage bodies in series with the other components. At the bottom of the tank with a gate in the gate below the horizontal screw conveyor equipped (commonly known as horizontal stirring cage), is driven by the power take off from the auto gearbox output power, and then drive high pressure pump to drive the hydraulic system, the hydraulic motor via a transmission driven horizontal screw conveyor blade shaft and blade rotation, the activities of the delivery system (commonly known as activity stir cage) to feed output. Flat roof facing a discharge auger activity rotatably and lifting, transportation, spiral lying in the top of the tank top; when unloading the lift, the tube end of the discharge port and storage of livestock and poultry farms feed door contact tank top, aligned to complete discharge.

Unloading bulk feed gas car

Unloading of bulk feed gas car vehicle using a large flow of gas delivery technology, with low pressure, high flow, low noise, high output, transmission distance, discharge speed, low residual amount of material pollution. Widely used in various types of enterprises farming, feed processing enterprises feed transport, solve the problem of long-distance transmission can be realized without entering a vehicle that is able to complete the feeding step of feeding the tower, put an end to farm vehicles approach the most headaches prevention issues.

Auger bulk feed electric car

Electric auger bulk feed truck for different customers the latest development, new products to meet the low-end market, the car unworthy board generator, electric auger to use three-phase 380V mains supply, the wheels can adapt from the small rural country road. The car is very popular customers cost-effective for small road small farms, feed mills. Mechanical screw discharge mode, discharge speed, continuous operation, greatly improving production efficiency. It can be divided into two to four tank compartment while loading different feeds; simple components structure, convenient and flexible operation, easy maintenance.

Bulk Feed Truck

Bulk Feed Truck,Bulk Feed Trailers,Feed Mixer Truck,Bulk Feed Discharge Truck

CLW GROUP TRUCK , https://www.clwgrouptruck.net