the reason:
A. The power switch is damaged and there is no power input;
B. The fuse ACFU is blown.
2. After the ultrasonic cleaner turns on the power switch, the indicator light is on, but there is no ultrasonic output.
the reason:
A. The connection plug of the transducer and the ultrasonic power board is loose;
B. The fuse DCFU is blown;
C. Ultrasonic power generator failure;
D. The transducer is faulty.
3. Ultrasonic cleaning machine DC fuse DCFU is blown.
the reason:
A. The rectifier bridge or power tube is burned;
B. The transducer is faulty.
4. After the ultrasonic cleaning machine turns on the power switch, the machine has ultrasonic output, but the cleaning effect is not as good.
the reason:
A. The cleaning liquid level in the cleaning tank is improper;
B. The ultrasonic frequency coordination is not adjusted;
C. The temperature of the liquid in the cleaning tank is too high;
D. improper cleaning solution.
High precision: Since the energy of the ultrasonic waves can penetrate tiny gaps and small holes, it can be applied to cleaning with any component or assembly. When the parts to be cleaned are precision parts or assemblies, ultrasonic cleaning often becomes the only cleaning method that can meet its special technical requirements;
Fast: Ultrasonic cleaning is much faster than conventional cleaning methods in dust removal and descaling of workpieces. The assembly can be cleaned without disassembly. The advantages of ultrasonic cleaning to save labor often make it the most economical way to clean;
Consistent: Whether the parts being cleaned are large or small, simple or complex, single or batch or on an automatic assembly line, ultrasonic cleaning can achieve unmatched uniform cleanliness by hand cleaning.
Geared Traction Machine For Elevator / Lift, Elevator Spare Parts.
Geared traction machines are driven by AC or DC electric motors. As the name implies, the electric motor in this design drives a worm-and-gear-type reduction unit, which turns the hoisting sheave. While the lift rates are slower than in a typical gearless elevator, the gear reduction offers the advantage of requiring a less powerful motor to turn the sheave. These elevators typically operate at speeds from 38 to 152 meters (125-500 ft) per minute and carry loads of up to 13,600 kilograms (30,000 lb). An electrically controlled brake between the motor and the reduction unit stops the elevator, holding the car at the desired floor level.
Geared Elevator Traction Machine
Geared Traction Machine
Geared Traction Motor, Geared Elevator Motor, Geared Traction Elevator, Geared Elevator Traction Machine, Geared Elevator Machine
Ningbo Xinda Elevator Traction Technology Co., Ltd. , https://www.xinda-elevator.com