Shanghai Haozhuang Instrument Co., Ltd. develops the Hao Zhuang (LNB) brand constant temperature oscillator, which is energy-saving and environmentally friendly, leading the country. Professional manufacturing is more secure and affordable.
Instructions for use â‘ Turn on the power, and the self-test will end in about one minute. If "000" is displayed, the sensor is open or the input signal exceeds the measurement range.
â‘¡Press the SET key to set the temperature, press the SET key until the lower row of the code tube flashes, indicating that the meter enters the temperature setting state, press the â–³ key to increase the set value, press the â–½ key to decrease the set value, and press The SET key returns to the normal working state and the temperature setting is completed.
â‘¢When confirming that the value displayed by the instrument is not the correct measured value, the displayed value can be corrected. Press SET key for 3 seconds to enter the inner menu of the instrument. After selecting the parameter SC, cooperate with the â–³ or â–½ key to modify this parameter. The correction range of the sensor error is 50 to -50. After the correction is completed, press the SET button for 3 seconds to exit. The correction value is 0 when the meter leaves the factory. When using it, it is necessary to prevent the meter with the correct display from being corrected to be incorrect.
â‘£The auto-tuning function of the instrument: This product can adapt to most control systems. Only when the control effect is particularly unsatisfactory, the auto-tuning can be started. Press the SET key for 3 seconds to enter the inner menu of the instrument. Press the key to turn on auto-tuning. At this time, the At indicator starts to blink and the instrument enters the automatic tuning parameter working state. The instrument controls the heating system to fluctuate twice near the set point. When the At light is off, auto-tuning ends and the new PID parameters are locked in the chip in.
7. Turn on the oscillation switch, the indicator light is on, and slowly adjust the speed control knob to the required speed.
8. After the work is completed, set the temperature control button and speed control knob to the minimum value, and cut off the power supply.
Matters needing attention 1. The whole machine should be placed on a firmer work surface or on a flat and dry floor. The environment should be neat and clean without humidity and well ventilated.
2. The power socket provided by the user should have good grounding measures to prevent the induction of electricity in the case.
3. It is strictly forbidden to move the machine during normal work.
4. It is strictly forbidden for objects to hit the machine.
5. Children are strictly prohibited from approaching the machine to prevent accidents.
6. Make sure that the power supply has been cut off before replacing the fuse.
7. Please clean the machine after use, and no water droplets or dirt remains.
8. The instrument should be kept by a special person to prevent damage to others.
9. If the instrument is not used for a long time, the power supply should be cut off.
It is well-known that thermostatic shakers can be used in scientific research in plants, organisms, microorganisms, genetics, viruses, medicine, environmental protection, food, petroleum, chemical industry, etc., and in the education department for precision cultivation of various organisms, genetic engineering research, petrochemical heating, etc. .
Classification:
1) According to the assembly, it is divided into water bath, gas bath and oil bath gas bath thermostatic shaker: it is a biochemical instrument with temperature controllable thermostatic gas box and oscillator. The water bath thermostatic shaker is a temperature controllable water bath The oil bath thermostatic shaker combined with the vibrator is a temperature-controlled oil bath tank and oscillator. The temperature control of the gas bath shaker is up to 70 ° C, and the common temperature is 37 ° C.
The temperature control of the water bath shaker can reach up to 100 ° C
2) According to the vibration method: gyroscopic (laboratory), reciprocating, dual function (gyroscopic and reciprocating)
3) According to the oscillation frequency:
There are three common types: 30-200RPM 400-300RPM 60-400RPM
Among them, the oscillation frequency reaches 400RPM, because the oscillation frequency is relatively large, so the requirements for the Erlenmeyer flask are high 4) According to volume: micro, constant and large 5) According to the constant temperature range: low temperature (5-50 ℃) and normal temperature and high temperature 6) Divided by the number of layers: single layer and double layer 7) Divided by the number of doors: single door and double door 8) Divided by the display method: digital display (only numbers can be displayed) and LCD display (display numbers and letters)
9) According to the timing function: timing and normally open 10) According to the placement method: vertical, desktop, stacked., Floor type 11) Whether environmental protection is divided: fluorine and fluorine-free 12) According to heating power: 999W or less, 1000W-1999W; above 2000W 13) According to the oscillation amplitude: Φ25mm (commonly used), Φ50mm (large)
14) According to the use of power: 220V 50HZ 240V 50 / 60Hz (United States Thermo)
15) According to the drive mechanism: three-dimensional balanced eccentric wheel drive four-side slide bar drive mechanism 16) According to the compressor: imported and domestic, high-quality fully enclosed compressors and air-cooled sealed compressors
17) Amplitude adjustment method: multi-level adjustable stepless adjustable
Shanghai Haozhuang Instrument Co., Ltd. is a company specializing in the research, development, production and sales of cryogenic laboratory equipment and ultrasonic equipment. The company has professional temperature control technicians and advanced production equipment; perfect production technology; guarantee product quality; achieve safe production. Strive to make the products beautiful, practical, stable and cost-effective, and strive to save more experimental space for our customers. We will provide you with safe, stable and high-performance experimental equipment as always, making your experimental process easier.
1. Quality assurance
-100% pure PVC raw material without any additive, no recycled material.
-Advanced producing technology, our flooring owns a high dense structure and excellent compression resistant rate.
-High-tech wear resisting performance processing technology, ensures wear resistance capacity and long life span.
-Annual sales of over 4 million square meters. Preferred brand choice for professional sports venues.
2. Clean and Eco-friendly
-No harmful substances, such as Formaldehyde, Soluble Volatile and Heavy Metals. ISO 14001 certified.
-Remarkable anti-pollution capacity. Reduce the waste of natural resources by frequent cleaning.
-Low maintenance cost, easy to clean without using wax.
3. Safe and comfortable
- Elastic cushion with stable support structure, ensures comfortable foot feeling and good optimal vertical force, thus provide excellent sports experiences for players.
-Excellent shock absorption provides best protection for the player`s knees, spines, joints and cartilages.
-Friction coefficient rate is between 0.4-0.7. Easy to balance the force of ground grip and good at slippery resistance. Suitable for different kinds of Ball games and other sports.
4. Easy installation
-1.8 meter in width to reduce welding connections. With elegant apperance and stable structure.
-With operable weight, the whole roll could be directly laid on existing concrete grounds or wooden floors. The overall visual effect is very good.
Gym Room,Gym Room Sports Flooring,Vinyl Gym Room Sports Flooring,Gym Room Flooring
Shijiazhuang Enlio Sports Goods Co., Ltd. , https://www.enliosports.com