Tips and Manuals for Thermosetting Inks in Use (I)

With regard to the use of thermosetting inks, from the original to the color separation, film, printing, printing all aspects will affect the final results.

Thermosetting inks are widely used in the printing industry because they do not block the web. It consists mainly of PVC resins and plasticizers. It is important to note that plastisol ink must be thoroughly dried.




Thermosetting inks can be printed on any fabric that can withstand a certain curing temperature. Unlike dyes, it does not react chemically with fibers. Instead it is wrapped around the fibers and physically reacts with the fibers. Therefore, thermosetting inks cannot be printed on substrates without voids such as plastics, metals, and glass; likewise, if there is no fixing agent, the fastness of thermosetting inks printed on waterproof nylon cloths will not be good.

First, the choice of mesh (refer to the following table)

Yarn/inch
Yarn/cm
30-40
12-16
Flash ink
60-95
24-38
Sportswear printing high hiding power foam
86-110
34-43
Dark-colored shirt cover strong base foam metal and flash ink
125-150
49-59
Plain light shirt printing base dark nylon coat silver flash ink
180-230
71-90
Light-colored shirt multicolor printed light-colored nylon trench coat
230-305
90-120
Light-colored shirt Multi-color printing Light-colored nylon coat Dark-shirt Overprint
305-355
120-140
Light-colored shirt four-color printing dark shirt overprint

Second, the choice of photosensitive paste

It is best to use solvent-resistant two-component or diazo direct emulsions for thermosetting inks, such as uno's INMARCOL-R and INMARCOL-W. For web printing and transfer, capillary film is a good choice.

Third, ink additives
Thermosetting inks are generally ready-to-use, but sometimes need additives. There are roughly the following:

1, viscosity reducing agent

If the ink is too thick to pass through the net, it is necessary to add a viscosity reducing agent. There are two kinds: one kind of main ingredient is the plasticizer, adding too much can not be completely dry. The other most common composition is a plasticizer and resin that does not destroy the balance between the components of the ink. In general, light-colored shirts require thinner ink; darker-colored shirts or sportswear require thicker inks.

2, filling base and transparent base

The filling base is very cheap, mostly used to reduce the cost of the ink; transparent base is to enhance the transparency of the ink when overprinting.

Other additives include softeners that enhance hand feel, nylon fixing agents, and foaming agents.

Manufacturers generally recommend that users use fillers or softeners to dilute the ink. We recommend using a viscosity reducer.

The amount of additive can enhance the fluidity of the ink, make it easy to pass through the net, reduce the problem of pasting plate, preserve the details of the image, and increase the production efficiency. If used improperly or excessively, the original balance between the components of the ink can be easily destroyed, resulting in failure to dry properly. This problem is usually discovered when the user's laundry fades. Therefore, please use the additives recommended by the manufacturer. Can clear ink be diluted? Many people think that if the opaque ink is diluted, the hiding power will be affected. In fact, if the ink is too thick, it will require more pressure to make the ink pass through the net, so that part of the ink will penetrate into the inner layer of the fabric. On the one hand, it shows that the hiding power is not enough; on the other hand, it cannot be completely heated and dried. Therefore, if the white ink is diluted properly, the hiding power will be better.

The thixotropy of thermosetting inks is very strong. Before adding any thinner, it is best to stir it first and then determine the added amount. Do not add mineral oil. Although mineral oil can initially enhance the flow of ink and is easy to print, it will soon become more viscous and difficult to print. What's worse is that it will not dry properly.

With the way of carrying tents, arrived at the scene to be assembled, so that various parts and tools. Learn the names of all parts and using the method, the familiar Tent structure, can quickly and easily set up tents.

 

Structure:

Inside and outside the tent curtains, tent poles and the wind rope, nails.

 

Category:

Outdoor tent is divided into several categories: advertising tents (promotional tents), military tents (commercial tents, tents, gable top site) tent, tour tents {(Season 3 (ordinary tent outdoor activity) and 4 seasons (winter / Alpine tent use)} relief tents, inflatable tents, wash fire tent, children's play tent. Below we detail these tents. According to different ways can be divided into open open tent and hand tent.

 

Application:

The field work, training camp, temporary clubs, sports entertainment and military headquarters, field hospital, emergency rescue and disaster relief, camping, leisure, tourism and so on.

 

How to select the right tent:

Beware of recommendation tent when we buy a tent generally see Recommendation tents. These tents are often placed in a very eye-catching places, and the general price discounts are very attractive, but the tent is really recommended for you? The general taking the recommended tent there are two possibilities: one is this tent inventory, and sales are not ideal, so in order to make the products sold to add the recommended way to better sales, better cleaning up inventory. The second is this tent product is really sell well, but when you want to buy it will be supporting associated with many peripheral products. So this is not to sell the business tent, but this product in the selection of merchandise, so we recommend tents, attention must be paid to the products in the market is really hot. Beware of the tent The business to play the writing skill for each businesses selling tents will have some words or pictures of the poster description, so as to make people fully understand the appearance of the tent, and the advantages and disadvantages, although we feel that this description is very detailed, so that they can quickly understand the need to buy a tent, but there are certain skills for general products, this often will be exaggerated, but in fact the function is not so complete, and they will in the text on the efforts to increase the function or effect. In fact, it is often very useful tricks, because we do not understand or know of the tent, so after businesses are described, it will become the product to some of the sky effect.

Tent

Tent

Camping Tent,Two Rooms Tent,Beach Tent,Kids Tent

Ningbo Vesta Leisure Products Co., Ltd. , http://www.vesta-leisure.com

Posted on