In winter, in order to ensure the temperature in the gym, many will choose to use warm sports wood flooring. However, in the time of purchase, let everyone buy and use floor heating properly, first of all avoid a few buying mistakes.
Misconception 1 As long as it is a floor, it can be used to warm the floor
“Can this kind of flooring be laid on a geothermal heating system?†Many consumers have had such questions when decorating gymnasiums or indoor basketball stadiums. In this regard, many guide buyers will answer: "Absolutely no problem, this is a special floor for geothermal." Some of the floor business will move out of the user instance, and some also come up with test reports to dispel the concerns of customers.
In fact, for a quality basketball court construction, it must meet the following elements: floor heating conductivity, dimensional stability, environmental protection, and durability. At present, the domestic flooring industry is researching and formulating relevant standards to quantify the above-mentioned several factors. At the same time, it will also lay down quality inspection standards for floor paving and warranty periods, so that the laying and maintenance of geothermal floors will also be energyized.
Misconception 2 Nominal "Geothermal Flooring" is most suitable
In the flooring market, the floors that can be used for geothermal heating are not only diverse in variety of names, but also include names such as "heat-resistant floor", "floor heating", "heat-resistant floor" and "anti-heat floor". It is a "heated floor."
Although many floors are known as “heat-generating floors,†in fact, this is unscientific and irrelevant. Nowadays, geothermal heating systems are in a period of vigorous development. The correct definition of “ground floor†should be: It applies to the laying of geothermal heating systems. Wood floor and can emit heat through the surface.
Misconception 3 The thicker the floor, the better the insulation performance
The thickness of the wood floor is an important factor in determining whether or not the foot feels comfortable. Therefore, many consumers require a thickness of at least 12 mm when purchasing wood flooring, especially when purchasing solid wood, solid wood multi-layer flooring or bamboo flooring. When purchasing geothermal floors, many consumers also choose according to this method.
Because wood is a poor conductor of heat, if the thickness of the floor is too thick, it is not conducive to heat conduction through the floor to the surface, but it is consumed in the conduction process. In addition, if the floor is too thick, the temperature difference between the upper and lower surfaces of the floor may be too large, and “thermal expansion and contraction†causes deformation of the floor.
Aluminum Diamond Plate 3003-H22 is easy to fabricate and its raised diamond pattern provides good slip resistance and walking stability.
Application and uses of Aluminum diamond tread plate 3003-H22 bright are: extensive product use as scuff plates, running boards, and mud flaps for fire engines, ambulances, fire trucks, trailers and toolboxes, recreational, and four-wheel-drive vehicles.
Aluminum Diamond Plate
Aluminum Diamond plate sheet
Xiaoxian RuiYi Commercial Trade Co.,Limited , https://www.ryaluplate.com