Shanghai Haozhuang Instrument Co., Ltd. has developed the Hao Zhuang (LNB) brand constant temperature oscillator, which is energy-saving and environmentally friendly, leading the country. Professional manufacturing is more secure and affordable
Working mode of water bath oscillator 1. Cyclonic oscillation: This working mode is also called circumferential oscillation. It rotates 360 ° on the horizontal plane and oscillates. For example, in this way, the oscillated liquid is in a state of vortex in the container to achieve uniformity. Effect. 2. Reciprocating oscillation: As the name implies, it oscillates back and forth when oscillating, and uses inertia to oscillate the sample. Why should we use this oscillation mode? Because when the viscosity of the liquid is thick, the effect of this oscillation method is much better than that of the cyclotron oscillation. 3. Dual-function oscillation: that is, a combination of gyroscopic and reciprocating oscillations. Depending on sample characteristics and work requirements, you can choose any work method.
Brief description 1. Load the test bottle and keep it balanced. If it is a dual-function model, set the oscillation mode. 2. Turn on the power and set the timing time according to the scale of the machine surface. If you need to work for a long time, adjust the timer to the "normally open" position. 3. Turn on the power switch and set the constant temperature: (1) Put the small control switch in the "Setting" section. At this time, the temperature displayed on the display is the set temperature, adjust the knob, and set it to the temperature required for your work. can. (The working temperature you set should be higher than the ambient temperature, at this time the machine starts to heat, the yellow indicator light is on, otherwise the machine does not work) (2) Put the small switch of the control part to the "measurement" end, the temperature displayed on the display It is the actual temperature of the air in the test box. As the temperature in the box changes, the displayed number will change accordingly. (3) When the heating reaches your desired temperature, the heating will automatically stop and the green indicator light will be on; when the heat in the test chamber is dissipated and is lower than the temperature you set, a new round of heating will start again. 4. Turn on the oscillation device: (1) Turn on the oscillation switch on the control panel, and the indicator light is on. (2) Adjust the oscillation speed knob to the desired oscillation frequency. 5. Turn off the power after working, and set the speed control knob and temperature control knob to the lowest point. 6. Clean the machine and keep it clean.
|
Name |
okume Commercial Plywood |
|
SIZE: (MM) |
1220x2440, 920x2140; |
|
THICKNESS: (MM) |
2.5-25MM |
|
FANCY FACE(S) |
American Red Oak,African Sapelli,Red Beech,Burmese Teak; Chinese Ash, Bamboo; Cherry, Walnut,Ash Zebrano,Wenge, Bubinga; Black Walnut etc; |
|
GLUE |
E2; E1 ; |
|
ADVANTAGE |
Produced by imported assembled system machines, water washed and highly calibrated and high finish sanding |
|
DENSITY |
From 500KG/M3 up to 550KG/M3; |
|
PAYMENT MODE |
L/C; T/T; D/P to be negotiable; |
|
PACKING |
Covered by plastic film and 8 mm MDF on sides/top and 15mm MDF on base with base blocks 7cm*7cm and 6+3+2 straps; Steel strapping from all sides; Very strong and high seaworthy packing. |
|
COLOR REQUEST: |
Light color (light brown or light grey) is available; |
|
USAGE |
Doors, tops and side panels for cabinets,and parts of furniture. |
Okoume Plywood,Indoor Okume Plywood,Okume Furniture Grade Plywood,Okoume Commercial Plywood
Shouguang Bailing Wood Industry Co., LTD. , https://www.bailingfurniture.com