Timing function of electric blast drying oven
Timing function
a. Under the normal working state, press the SET button twice to enter the timing setting state, at this time the PV display shows ST, SV display shows 0, and flashes;
b. Press the shift key to move the flashing to the desired setting position;
c. Press the minus key or plus key to adjust the number to the desired value;
d. Press the SET button once, the meter enters the timed running state, at this time the running indicator flashes;
e. The timer function is countdown operation. In the timer operation state, press the shift key once, the SV display shows the remaining time of the timer;
f. Timed remaining time returns to zero, the meter enters the timed end state, at this time the SV display shows End, and flashes, and all the indicators except the wind speed indicator are off;
g. When the timer is over, press the SET button once, the meter will return to normal working state.
h. At the end of timing, because the temperature control part of the instrument stops working, the measured value displayed on the PV display will drop to the ambient temperature, which is normal.
i. If you do not need to use the timer function, be sure to set the timer time to zero.
j. During the operation of the timing function, if an unexpected power failure occurs, after the power is turned on again, the remaining time of the timing will be automatically reset to zero.
This is a cute design of paper soap. Thin as paper,light weight,packed in a small case,easy carrying.
One wash only use one piece,no polution to others.
ANTI VIRUS PAPER SOAP
THIN SOAP,TRAVEL SOAP,HOTEL SOAP,TOILET SOAP
MIANYANG BIGANT TECHNOLOGY CO LTD , https://www.bigantech.com