Please keep in mind the precautions of the xenon lamp weathering test box, which can avoid the machine from malfunction due to improper human operation, and the correct maintenance method can extend the life of the machine.
Precautions for the use of xenon lamp weathering test box:
1. During operation, please do not open the door unless necessary, otherwise it may cause undesirable consequences.
2. In order to provide the safety of the test products of the machine and the operator, please check the water level of the water pressure controller and circulating water tank regularly.
3. Correctly install the test cloth of the wet bulb to ensure that the correct relative humidity is measured.
4. Please read this manual carefully before operating the machine.
Xenon lamp weathering test chamber installation site
1. The installation location should take into account the heat dissipation and the location where it is usually easy to check and maintain
2. The distance between the wall and any other machine should be at least 600mm.
3. Set on a flat and vibration-free ground.
4. Choose good ventilation, and avoid direct sunlight.
5. The machine should be far away from heat sources and flammable and explosive materials.
6. The power supply lines and water supply and drainage pipes should be as short as possible.
7. Please choose a place with less dust and moisture and good ventilation
Eyelash Curler,Stainless Steel Eyelash Curler,Beauty Eyelash Curler,Eyelash Accessory Tool
Yangjiang Etina Houseware Co., Ltd. , https://www.etinanailtools.com