Frequently asked questions before printing/output (5)

5.CoreIDraw

1 Textual Aspects â—† Some font description methods are different. Overlaps will appear after the overlap of the strokes.
◆ Paragraph texts containing special characters in Chinese and English are prone to problems such as “■, @, ★, ○” and so on.
â—† Use the new standard GBK font to solve the problem of losing rare characters.
â—† Too many fonts, it is best not to use multi-sub-3 color aliasing, such as (C10 M30 Y80), etc. Similarly, it is not suitable for dark background anti-white characters. Under conditions that cannot be avoided, it is necessary to reverse-hook the border, apply a similar color to the background, or print a single color (usually black K).
â—† The text should be turned into a curve. Frequently loading fonts is a hassle, and if the output center does not have the same font, it will delay a lot of time, and the nodes of the text after converting into curves are controlled within 1500.
â—† Some fonts will turn into "hollow words" after the curve is changed, such as the body GB2312, the imitation song GB2312, the Han Dingte Black Jane, and Han Dingmei Jian. Please use caution. In addition, some English-to-Chinese characters will also be hollowed out after the curve is turned over. We must also pay attention to it.
◆ CorelDraw text typesetting, if the text is copied from Word or Notepad, it needs to remove double-byte spaces (using word search/replace), otherwise it is easy to appear “bad word” and “run”.
2 The common problem is that red → black gradient fill, the wrong setting (M100 → K100), the middle will be difficult to see, the correct setting should be: (M100 →
M100K100), other cases and so on.
â—† Do not use RGB colors during the production process to fill in patches or lines.
â—† The black part of the gradient fill should not be too low, such as 5% black, because the output has a black overprint option, less than 10% of the black is usually used instead of overprinting, otherwise it will easily lead to problems, the same, use pure light black Also be careful.
â—† Single black (K100) shadow please turn four colors (C100M1OOYIOOK100), otherwise single black shadow will hollow out its layout, printing out will be difficult to see.
â—† When CoerlDmw uses the fill tool, the special effect fill must be viewed under the condition that the color is correct, and should be issued under the same conditions.
◆ CorelDmw uses “pattern fill” (CorelDrawl0/11/12 is called “pattern fill”). After rotation or deformation, the cut position of the pattern will change. Please note that the solution is to transfer the image.
3 Image Problems â—† In PageMaker, the RGB link diagram should be changed to CMYK, otherwise the output is a grayscale image.
â—† Minimize the use of PSD format in graphic files.
â—† In CorlDraw, put the PSD format file, please merge its layers first.
◆ Do not do any “destructive operations” after importing PSD files, such as rotating, mirroring, and tilting, and the relationship between the transparent masks of the child and outputting a broken map; the pictures should be re-mapped in CodDmow once. .
â—† Resolution and re-sampling, do not do this "convert to bitmap" in CorlDraow is indeed convenient, but the loss is color reproduction.
â—†Pantone special colors are available for spot colors, and Pantone printing colors are not available.