ã€Abstract】Furniture is closely related to people's lives, affecting people's quality of life and physical health. Therefore, consumers are reminded that before purchasing furniture, it is best to reserve knowledge in advance and learn to choose and identify various furniture. Home furniture http://mxj.cnjiaju.com/share
1. Whether the furniture materials are reasonable and different, the surface materials are different. For example, the legs of tables, chairs and cabinets require hardwoods, which are relatively strong and can bear the weight, while the internal materials can be used with other materials; the thickness of the large wardrobe legs is 2.5cm, too thick and clumsy, thin and easy to bend Deformation; kitchen and bathroom cabinets can not be made of fiberboard, but should be used with plywood, because the fiberboard will expand and damage when exposed to water; the dining table should be washable.
2. Found that the wood has insect eyes and foam, indicating that the drying is not complete. After checking the surface, open the door and drawer door to see if the inner material is rotten. You can use your fingernail to lick it. If you break it in, it means that the inner material is decaying. After opening the door, smell it with your nose. If it is nose, glare, or tears, it means that the formaldehyde content in the glue is too high and it will be harmful to the human body.
3. Wood moisture content does not exceed 12
The moisture content of furniture should not exceed 12%, the water content is high, and the wood is easy to warp and deform. When the average consumer buys, there is no test instrument. You can take the method of hand touch and touch the bottom of the furniture or the place where there is no paint inside. If you feel the moisture, the moisture content is at least 50%, which cannot be used at all. Another way is to sprinkle a little water on the unpainted wood. If the sputum is slow or not, the moisture content is high.
4. Whether the furniture structure is firm and small pieces of furniture, such as chairs, stools, hangers, etc., can be dragged on the concrete floor when picking, gently falling and falling, the sound is crisp, indicating good quality; if the sound is dumb, there are flaws The noise of the slaps indicates that the blinking is not tightly combined and the structure is not strong. The desk and table can be shaken by hand to see if it is stable. The sofa can sit and sit. If you sit on a move, you will twist and sway. If you shake it, it will be a nail, and it will take a long time.
Square tables, tables, chairs and other legs should have four triangular clips, which can be used for fixing. When you choose, you can look over the table and chair. The cloth chair can be touched by hand.
5. Whether the four feet of the furniture are flat or not, it is clear that the furniture has only three legs to land. Look at the desktop is straight, can not bow back or collapsed. The table top is raised, the glass plate is placed on it, and the table top is recessed, and the glass plate is crushed by a pressure. Pay attention to the inspection of the cabinet door. The slit of the drawer should not be too large. It should be straight and straight, and the door should not sag.
6. The veneer furniture is not strictly tight. Whether it is veneer veneer, PVC or pre-painted paper, it is necessary to pay attention to whether the leather is flat, whether there is drum, foaming or not.
Look at the light when you check it, and don't see it when you don't. The ash veneer veneer furniture is relatively damaged, generally only used for two years. In the case of wood veneers, the veneered veneers are better than the chopped ones. The way to identify the two is to look at the pattern of the wood. The wood texture of the cut veneer is straight and dense, and the veneered veneer pattern is curved and sparse. Particleboard veneer furniture, the ground part must be edged, and the edge banding will absorb moisture, swell and damage. Generally, the corners of the veneer furniture are easy to be tilted up. When picking, you can buckle the corners by hand. If you buckle it up, it means there is a problem with the glue.
7 Whether the furniture edge is flat and the edge is not flat, indicating that the inner material is wet, and the sealing will fall off in a few days. The edge banding should also be rounded and not straight at right angles. The edges sealed with wood strips tend to get wet or crack. The furniture inlaid with the plywood is nailed with nails. It is necessary to pay attention to whether the nails are flat and whether the color of the nails is consistent with other places. Usually the nail hole is sealed with putty. Pay attention to whether the putty is bulging. If it is bulged, it will not work. Slowly, the putty will fall out from the inside.
8. Mirror furniture should choose a mirror-like furniture, such as a dressing table, a mirror, and a dressing mirror. Pay attention to the photo, see if the mirror is deformed, and check if there is a liner on the mercury at the back of the mirror. And the backboard, no backboard is unqualified, no paper is not good, otherwise the mercury will be worn away.
9. The paint part should be smooth and the paint part should be smooth and flat, not sprinkled, wrinkle-free, and flawless. The corners are not straight at right angles, and the straight edges are prone to slag and paint. There should also be a paint inside the door of the furniture, without the paint board being easy to bend and not beautiful.
10. Is the fitting installation reasonable? For example, check the door lock switch is not working; the big cabinet should be equipped with three dark hinges, and some can only be installed with two; the upper three silks, some cut corners, only one screw , use will fall.
11 sofas, soft beds to sit on a sofa, soft bed, should pay attention to the surface should be flat, but not high and low; soft and hard to be even, but not hard, that piece of soft; soft hardness should be moderate, neither Too hard and not too soft.
The method of selection is to sit down and squat with your hand, the flatness is not flat, and the spring does not ring. If the spring laying is unreasonable, causing the spring to bite the spring, it will make a sound. Secondly, it should also pay attention to whether the quilting has broken wires or jumpers, and whether the density of the corner teeth is reasonable.
Hair Scissors,6 Inch Hair Cutting Scissors,Cutting Hair Scissors Set,Design Barber Scissors Set
Zhangjiagang Mister Tools Co., Ltd , https://www.msscissors.com