Kids Ride Outdoor Sightseeing Trackless Train, Ce Approval

Kids Ride Outdoor Sightseeing Trackless Train, CE Approval

Specifications
 
Picture Shows







Company profile
Wuhan dising technologies Co., Ltd.Is located in the east lake new technology development zone in wuhan, hubei province.It is a professional supplier of tourist attraction, theme park, characteristic town, and commercial block slow rail transit system;Our service covers the whole process of slow rail transit system survey and design, special track vehicle design and so on.
We promise to improve our professional skills and be based on a careful design attitude, a profound understanding of customer needs and a rich experience in project implementation, to provide customers with high quality and reliable products and economic and reasonable projects.

Products Series
In the years of industry experience, the company created the Taiwan tenyun steam locomotive replica plate, the Tianya  corner scenic spot in Hainan, the Changchun Yuet square project, the tram, the Shandong lling National Agricultural Park sightseeing train, the Anji Lu Jia Village sightseeing small train and so on. The main products covers three kinds of landscapes:tourism. Sightseeing trains, sightseeing trams and locomotives three kinds of landscapes.
1. Electric Train Sets
2. Electric Locomotive DSW-E58
3. Fun Train
4. Sightseeing Mini Train
5. Tram

Delivery and Shipment
Shipping by sea: Around 4 weeks to arrive.
Delivery Time: Around 30 working days after receipt of deposit.
MOQ: 1 set train.
Payment Term:  30% T/T deposit, 70% T/T before delivery.

Warranty
Electric Trackless Tourist Train: 1 year full warranty,offer FREE components under EXW shipped term.

FAQ
1.Q: Can I get some samples? 
A: Yes,sample order is available for quality check and market test.
 
2. Q: What's the delivery time?
A: It usually takes about 25-40 working days for production based on specifications for your order and quantity.
 
3. Q:What's your payment terms?
A: We usually accept T/T or L/C at sight as the main payment terms,and
other payment can also be negotiated.
 
4. Q:What's your warranty terms?
A: We offer different warranty time for different components, please contact us for details.
 
5. Q: Do you have the trains in stock?
A: No,all locomotive and carriages will be newly produced according to your order including samples.
 
6. Q: Can I mix different models in one container?
A: Yes, different models can be mixed up in one full container.
 
7. Q: How does your factory do regarding the quality control?
A: Quality is priority. We always attach great importance to quality control from the very beginning to the end of the production. Every product will be fully assembled and carefully tested before packing and shipping.
 
8. Q: Will you deliver the right products as I ordered? How can I trust you?
A: Yes, we will. The core of our company culture is honesty and loyalty. Our company has been audited and approved by SGS and TUV, assessment report will could be sent to you by email. If you check, you will see that we have never got any complaint from our customers.

Nylon Zipper

Nylon Zipper(Coil Zipper, Polyester Zipper)

Nylon zipper is a zipper, nylon monofilament is wound around the center line formed by heating stamper.

According to the material zipper, zipper into three categories: Metal Zipper, resin zipper, nylon zipper. Metal zipper teeth is made of copper or aluminum row by row of teeth out of the machine, using polyester resin zipper teeth are plastic rice by color and by dye injection molding machine out of the row, and nylon zipper teeth are made of nylon monofilament by heat press winding mold centerline thereof. Qikai accessories Tips compared to metal zipper, resin zipper, nylon zipper low cost, high yield, high penetration characteristics.

Quality Introduction
Nylon zipper can be divided by species:
1, closed-end zipper
2, open-end zipper (about interpolation)
3, two closed-end zipper (X or O)
4, double open end zipper (about interpolation)

Features introduced
1. nylon zipper can be used in all kinds of occasions, but generally prefer to use on sportswear, shoes, bedding, luggage, tents.
2. Common slider is painting, sometimes using electroplating.
3. nylon zipper material is mainly polyester, the cost is relatively low, the market is currently more like a zipper.

Installation method
â‘  First prepare nylon zipper and zipper fabric needs to be filled

â‘¡ will need to install a zipper 1.5 cm wide seams first basting again, and then ironing the seam allowances apart. If you do not need to crack the whole are installed on the zipper, then do not install this period seam zipper parts used needle from going fine point, and the start and end positions have to use down the needle holder;
â‘¢ nylon zipper face down and centered seam allowance, using a hand sewing needle and parts of it basting fixed;
â‘£ fabric will turn positive, to sew on a sewing machine fitted with a zipper unilateral presser foot, down the right side of the presser foot needle, start from the opening to the right of nylon zipper, 0.7 cm seam allowance on the fabric in a press Ming line;
⑤ When you have finished one side of the suture, the seam preparation when the other side, look at the bottom zipper bag iron location, if you can avoid it, you can turn 90 degrees, so that the needle across the top of the zipper to the other side began to suture . Jiangsu Qikai turning accessories recommendations should let the needle in the lowest position and then raise the presser foot, and then turn down the presser foot to continue sewing. When sewn to the top of the zipper teeth are not going to step on the electric motor, but turn the machine round, so the needle carefully over the nylon zipper teeth, to avoid needle;
â‘¥ If the package iron just at the turning position, then you will only press down the left foot needle, from the opening began to sew a bright line on the left. Qikai accessories Tips Note Crimping beginning and end do not forget to pin down. Finally, the suture removed sparse cloth on;
⑦ car for law skilled people who can not be basting, but for the novice, making the process more steps are still necessary, although to a little trouble, but it ensures satisfactory results.

Components Introduction
1. tape tape made of cotton yarn, chemical fiber or mixed fiber woven into a flexible belt for carrying chain zipper teeth and other components;
2. ribbed edge bead cloth belt used to carry the reinforcing part of metal or plastic fastener elements;
3. tendons rope rope rope middle finger ribbed by a multi-strand fiber composition;
4. refers to the element scoops metals, plastics and other materials were processed through a shaped teeth;
5. SMIC line filler cord is processed by multi-strand fiber cable made of nylon fastener chain for the production of rope;
6. The tooth chain chain refers to the teeth are arranged in a row;
7. The fastener stringer one side zipper chain chain teeth fixed in a cloth belt, said fastener stringer;
8. The chain belt on both sides of the zipper chain from engaging fastener stringer chain belt;
9. TDC top stop fixed to the fastener chain belt fastener chain pull timely limiting slider stopper slide fastener chain belt;
10. The next stop is fixed to the bottom stop tooth chain belt, limiting the slider when the slide fastener stringer chain teeth pulled, and so both sides of the fastener stringer can not be completely separated from the stopper;
11. The front and rear portions of the element does not take the lead tape, said the lead on Back & forth head tape zipper, the only side to take the lead before the next stop after the end of the lead;
12. The cannula (also called latches) pin separable fixed in the open end of the end of the zipper, for completely separate tubular member chain belt;
13. The outlet box retainer secured to the end of the zipper open end, entirely separate block member for chain belt;
14. The double open end stops at one kind of the cannula with two pin for the tubular member profile zipper on double open end;
15. Strengthening tape strengthened tape for enhanced intubation, sockets and tape bonding strength, improve the life of the fastener composite sheet;
16. The slider slider moving part and pull the chain engaging teeth;
17. The puller is a component of the pull-tab slider, which can be designed into a variety of geometric shapes and the slider body coupling or through middleware and the slider body coupling realize zipper closure;
18. The intermediate coupling member coupling the connecter of the slider body and the pull tab of the intermediate member;

*Related Products:two way separating zipper.

Nylon Zippers,Nylon Coil Zippers,Nylon Coil Zipper,Nylon Coil Zip,Nylon Zip

Shenzhen Yiyixing Zipper Manufacture Co.,Ltd , https://www.yyxzip.com