Sodium chloride solution preparation
The reagents used in the salt spray laboratory are chemically pure or above. Sodium chloride is dissolved in distilled water or deionized water with a conductivity not exceeding 20uS / cm, and its concentration is 50g / L ± 5g / L. At 25 degrees, the density of the prepared solution is in the range of 1.025 5 ~ 1.040 0. There are unused test methods for the salt spray test chamber, and each unused test method has a different solution preparation method.
Neutral salt spray test (NSS test)
Adjust the pH value of the salt solution prepared with sodium chloride solution to be between 6.5 and 7.2. The pH value can be measured with an acidity meter. As a daily test, a precision pH test paper with a measurement accuracy of 0.3 can also be used. The pH of the solution can be adjusted with hydrochloric acid or sodium hydroxide.
The loss of carbon dioxide in the solution during spraying may result in a change in pH. Corresponding measures should be taken, for example, heating the solution to more than 35 degrees before sending it into the instrument or preparing a solution from fresh boiling water to reduce the carbon dioxide content of the solution. Must change the pH value.
Acetic acid salt spray test (AASS test)
Add an appropriate amount of glacial acetic acid to the salt solution prepared according to the sodium chloride solution to ensure that the pH value of the collected solution in the salt spray test chamber is 3.1 ~ 3.3. If the pH of the initially prepared solution is 3.0 ~ 3.1, the pH of the collected solution is generally in the range of 3.1 ~ 3.3. The pH value is measured with an acid meter. As a daily test, a precision pH test paper with a measurement accuracy of 0.1 can also be used. The pH of the solution can be adjusted with glacial acetic acid or sodium hydroxide.
Copper accelerated acetate spray test (CASS test)
In the salt solution prepared by adjusting the pH, copper chloride (CuCl2 · 2H2O) is added, and its concentration is 0.26g / L ± 0.02g / L (ie 0.205g / L ± 0.015g / L anhydrous copper chloride). The method of adjusting the pH of the solution is the same as the acetate spray test (AASS test)
Ice bucket is mainly used as a container for beer, and it is suitable for various bar parties, family picnics and gardens. The main material is galvanized iron and tinplate, and the thickness of the barrel is 0.28mm and 0.35 mm.
As for the size ,color logo and the handle type of our high quality bucket, it will be customized according to the different needs of customers.
And our bar buckets are relatively cheap, durable and easy to use. we will pay more attention to details, develop and innovate with advanced manufacturing technology.
Ice Bucket
Ice Bucket,Metal Ice Bucket,Beer Ice Bucket,Wine Ice Bucket
True & Bright Metal Packaging Co.,Ltd.KaiPing , https://www.tnbcan.com