Type of cloakroom

[ Chinese wardrobe net ] In the home market, the style of the cloakroom is dazzling. In general, the cloakroom can be divided into four categories: slab cloakroom, box cloakroom, metal shelving cloakroom and back-hanging cloakroom.

cloakroom

Plate cloakroom:

The particle board and the MDF are mainly made of metal connectors. Cheap and practical, the most on the market, but also the installation conditions, the most non-required.

Box cloakroom:

Generally, there is no backboard, and the supporting method is consistent with the multi-station type, which is supported by the vertical grid, and the partition plate and the drawer cabinet are fixed thereon. The overall stability is not as good as the plate type, such as the "one" shape needs to be fixed with the wall to increase the stability.

Metal shelving cloakroom:

Supported by metal rods "top of the ground" or fixed with side walls. The wall must be a load-bearing wall, and the roof should be either a solid roof or a reinforcement. The reinforcement method is to add a large core board to the ceiling plasterboard. At that time, metal shelving cloakrooms were popular, but this style of cloakroom was made of pure aluminum because of metal rods. Therefore, the price is much higher than the price of the plate cloakroom.

Back-mounted cloakroom:

The back-mounted load-bearing is the backboard. First, the backboard is fixed to the wall, and then the accessories are hung on the backboard. This type of construction is troublesome, and the damage to the wall is large, and the bearing capacity is very limited.

FISHING REELS

WEIHAI WEFISH OUTDOOR PRODUCTS CO.,LTD , https://www.wefishtackle.com

Posted on