Subtle identification of the quality of furniture

Modern urban life is busy and tense, and a warm home can bring everyone the most relaxing leisure time.

When buying furniture, most people tend to focus on the shape of the furniture, but little is known about how to identify the quality. Insiders suggest that we can identify the quality of furniture from a lot of nuances.

Investigate the materials of furniture

The surface materials of furniture generally require hardwood materials, such as ash, eucalyptus, etc. These woods are relatively strong and can bear the weight, while the internal materials can be considered other materials; the thickness of the large wardrobe legs is 2.5 cm. Too thick is clumsy, thin and easy to bend and deform; kitchen and bathroom cabinets can not use fiberboard, but should use plywood, because the fiberboard has strong water absorption, it will expand and damage when it meets water; the restaurant table should be washable.

If the wood is found to have insect eyes and foaming, it means that the wood is not thoroughly dried. Such furniture cannot be bought because the insect eyes will become bigger and bigger. After checking the surface, you should also open the home cabinet door and drawer door to see if there is any decay in the material. You can use your nails to lick it, and you can easily break in and the internals are decaying. After opening the door of the furniture cabinet, smell it with your nose. If there is a phenomenon of nose, glare, and tearing, it means that the formaldehyde content in the glue is too high, which will endanger human health.

Whether the structure is firm

When selecting small pieces of furniture such as chairs, stools, hangers, etc., you can drag on the concrete floor and drop it gently. If the sound is crisp, the quality of the furniture is good. If the sound is dumb, there is a murmur. The blink of an eye is not tightly integrated and the structure is not strong. For desks, tables and other furniture, you can shake it by hand to see if it is stable. For the sofa, sit and sit, shake it from side to side, inactive, not soft, no sound, indicating that the structure of the blink is relatively firm.

Is the four feet flat?

Whether the four feet of the furniture are flat, the furniture will be placed on the flat ground and you will know. Some furniture has only three legs to land, and the stability can certainly be bad. Also look at the desktop is straight, can not bow back or collapse, if the table is raised, the glass plate will be rotated to turn; if the table is recessed, the glass plate will be crushed by a pressure. In addition, we must also pay attention to the inspection of the cabinet door, the slit of the drawer should not be too large, we must pay attention to the horizontal and straight, the door can not sag.

Whether the edging and sealing are flat and strict

The edge is not flat, indicating that the inner material is damp, and the seal will fall off after a long time of use. The edge banding is preferably rounded and cannot be straight and right angled. The edge sealed with wood strips tends to swell or crack; the furniture wrapped with plywood is nailed with nails. Pay attention to whether the nails are flat and the color of the nails is consistent with other places. Usually the nails are sealed with putty. Pay attention to whether the putty is bulging. If it is bulged, the putty will fall out from the inside.

Sofa, soft bed, soft and moderate

When selecting sofas and soft beds, it should be noted that the surface should be flat, not uneven, and the hardness should be moderate. The method of selection is to sit down and then rub it with your hand to see if the spring does not ring. If the spring is not arranged properly, the spring will bite the spring and it will make a sound. Secondly, it should also pay attention to whether the quilting has broken wires or jumpers, and whether the density of the corner teeth is reasonable.

Whisky Bottle

The world of whiskey is a complex maze of grains, flavors, and distillation processes. It is one of the most diverse distilled spirits in the bar. How to make your Whisky difference and come out on top form others? You need a attractive packaging, a unique and beautiful glass packaging will play an important role in the whole quality of your spirits. We are professional to custom glass bottles and to make your Whisky in good appearance.





Extra-flint, high-flint and flint glass


Machine made


50 to 3000ml or as your requirements


150 to 2000g and so on

Sealing type

Screw cap or cork


Any color as you requirement

Quality control

SGS, FDA, ISO9001, ISO14001

Deep processing

Silk screen, decal, spray painting, electroplating, frosting, sand blasting.

Delivery term


Payment terms


Lead time

New design drawing confirm within 3days, Sample mold within 20 days, bulk molds within 30 days, produce in bulk within 30 days


Q:  Are you a manufacture or a trading company?

A:  We are a manufacture which located in Chengdu city and Yibin city, Sichuan, China.

Q:  Can you customize the products?

A:  Yes, we are professional to customize glass bottle, we can design the new drawings and open the new molds according to your requirement.

Q:  Do you provide free sample?

A:  Yes, for cooperation sincerity, we are glad to provide you samples for free, but for new customer, the express cost need to be paid.

Q:  What is your MOQ?

A:  Our only standard for MOQ is a 40 feet container.

Q:  How long is your sample lead time, mold need time and production lead time?

A:  New design drawing confirm within 3 days, sample mold within 20 days, bulk molds within 30 days, produce in bulk within 30 days

Whisky Bottle

Whisky Bottle

Whisky Bottle,Customized Whisky Bottles,Whisky Wine Skull Bottles,Whisky Glass Wine Bottle


Posted on