Revision of Bookbinding Standard (I)

I. The basis and necessity of amending the standards In order to better implement the Ninth Five-Year Plan for National Economic and Social Development and the Outline of its 2010 Vision, according to the spirit of the "Standardization Law of the People's Republic of China", the State Administration of Quality and Technical Supervision To revise the requirements for material standards, under the guidance of the Press and Publications Administration, the National Printing Standardization Technical Committee decided to revise the fifteen books and periodicals printing standards that were established and used in 1991. Nine of them were related to binding standards.
The fifteen "Book Printing Standards" issued and implemented in 1991 were not able to find the corresponding reference materials due to the limitations of the conditions set at that time. The drafters' level was also limited, and more than seven years after the implementation of the standards, the During the period, major changes have taken place in printing equipment, process technology, raw and auxiliary materials, inspection methods, personnel quality, and management level. The content of the standard has not been adapted to current production needs. After the implementation of the fifteen standards, two batches of standards on binding have been formulated one after another. There is a place where there is no uniformity in the content before and after the introduction. Therefore, it is absolutely necessary to revise these standards.
2. Principles and Guiding Ideology for Revising Tickets The basis and guiding ideology for the revision of the bid is the guidance of the “Two Transformations” put forward by the State Bureau of Technical Supervision, driven by reforms, and market-oriented, improving the level, perfecting the system, and accelerating the convergence. The principle of standardization is to promote development and hostile to the socialist modernization of the enemy. The principle is that the revision of the standard must be closer to international standards and be combined with domestic realities to guide the actual work.
At the fifth national communication meeting of the Standardization Technical Committee held in October 1997, representatives from more than 80 localities held serious discussions on the revision of fifteen standards. In November 1997, the Standardization Commission held a seminar on the revision of experts in Beijing, and put forward many useful opinions and suggestions, clarifying the guiding ideology of the amendment: If there are international standards, they can be equivalently adopted (ISO9000 standard). ); can not be equivalent to the use of the equivalent can be used to close to international standards or advanced foreign standards, absorbing its essence, for my use. However, regarding the book printing and binding standards, we have been paying attention to the collection of information from the beginning to this time. We have not found the same or similar standards. Therefore, this time the amendment was based on in-depth investigation and study, careful testing and extensive solicitation of opinions, combined with the practice of medium and large-scale enterprises, and considering the development of science and technology, equipment updates and material performance improvement. In the revision process, wherever possible quantitative indicators, try to use data to indicate. For those that are difficult to express in data, use accurate representations.
III. Determined the style and structure of the new binding standard Among the nine binding standards implemented in 1991, there was the CY/T7.1 “Post-press Processing Terminology” standard, which was revised due to the GB 9851 national printing technology terminology standard. It was decided to incorporate the relevant contents of CY/T7.1 into GB 9851, and the “Presswork Terminology” standard was no longer revised. For ease of use, the binding standards have been adjusted and revised in style and structure.
To CY/T7.3 "Quality Requirements and Inspection Methods for Hardcover Book Blocks", CY/T7.4 "Quality Requirements and Inspection Methods for Glue-binding Books", CY/T7.5 "Quality Requirements and Inspection Methods for Spool Binding Books," CY /T7.4 "Quality Requirements and Test Methods for Hardcover Bookcases", CY/T7.7 "Quality Requirements and Testing Methods for Coating Films", CY/T7.7 "Quality Requirements and Testing Methods for Coating Films", CY/T7.8 "The requirements and test methods for foiling quality", CY/T7.9 "Cut quality requirements and inspection methods" were combined, and CY/T13 "Quality Requirements and Inspection Methods for Offset Printing" implemented in 1995 were adopted. CY /T16 "Quality Classification and Inspection Methods of Hardcover Books", CY/T20 "Quality Classification and Inspection Methods of Hardcover Albums," and CY/T21 "Classification and Testing Methods of Classical Works" and other standards, revised to "Binding Quality Requirements" And test methods - hardcover.
To be CY/T7.2 "Quality Requirements and Inspection Methods for Paperback Book Cores", CY/T7.4 "Quality Requirements and Inspection Methods for Glue-binding Books", CY/T7.5 "Quality Requirements and Inspection Methods for Spool Binding Books," CY /T7.7 "Quality Requirements and Test Methods for Film Lamination", the relevant contents of CY/T7.8 "Quality Requirements and Test Methods for Hot Foil" and CY/T7.9 "Quality Requirements and Test Methods for Cutting" were combined and absorbed. In 1995, CY/T13, "Cocoa, Persimmon, Coke, Calorie, Pepper, Harm, Y, and T14, Textbook Printing Quality Requirements and Test Methods," CY/T15, "Qualified Grades, Classification, and Inspection Methods of Paper-covered Books," , CY/T19 "Paper Quality Rating and Testing Methods" Teng content revised as "binding quality requirements and test methods - paperback."
To advance the content of the CY/T22 Standard for Quality Rating and Testing of Saddle-stitch Books and Periodicals implemented in 1995, and to incorporate the CY/T7.7 “Quality Requirements and Test Methods for Laminating Film” in the revised nine binding standards. The relevant contents of CY/T7.8 "Quality Requirements and Inspection Methods for Hot Foil" and other standards were revised to "Binding Quality Requirements and Inspection Methods - Saddle Stitching".
The revised style is the independent and post-press processing standards for hardcover, paperback, and saddle-stitching, which meet the requirements of the Ministry of Labor's professional classification. In order to make the revised standard scientific, reasonable, uniform, practical, and instructive, each revised standard is optimized by a combination of related standards, deleting duplicates, unsuitable or outdated content, and irrelevant The important words and expressions, some concepts that were not accurate enough and were similar to the content before and after the change were not uniform or even contradictory, so that the standard style was clear, the content was simple, clear, unified, and the limitations in the standard and the content of the standard were not improved. Easy to grasp, easy to apply, but also conducive to the implementation of corporate standardization. (To be continued)